MultiSense SL Transform Tree
The Multisense-SL unit stores a unique calibration to transform laser range data into the left camera optical frame. This calibration is comprised of two static transforms; one from the motor frame to the left camera frame, the other from the laser frame to the spindle frame. There is an additional transform between the spindle frame and the motor frame which accounts for the rotation of the laser. The Multisense-SL ROS driver automatically generates a transform tree based off these three transforms. Additionally, both the ROS driver and the underlying API offer mechanisms to perform custom transformations of laser data. The following sections detail this transform tree and provide a basic example of how to perform this transformation.
1.1. MultiSense SL Transform Overview
The Multisense-SL has three primary transforms between these four coordinate frames which are used to transform laser range data into the left camera optical frame. The first transform is a static transform between the fixed motor frame and the left camera frame which is described by the homogenous transform matrix HCM. In the ROS driver this transform is referred to as cameraToSpindleFixed. The second transform is between the spindle frame and the fixed motor frame which is described by the homogenous transform matrix HSM. This transform accounts for the spindle frame’s rotation about the z-axis of the fixed motor frame as the laser spins. The final transform is a static transform between the laser frame and the spindle frame which is described by the homogeneous transform matrix HSL. In the ROS driver is referred to as laserToSpindle. By multiplying these homogenous transform matrices together a laser range point in Cartesian space can be transformed into the left camera frame.
dC = HCMHMSHSL dL
Where dL is a 4×1 matrix of a single laser point in the x-z plane of the laser’s local frame and dC is a 4×1 matrix of a single laser point in the left camera’s optical frame.
1.2. ROS Transform Tree
The Multisense-SL ROS driver uses the robot_state_publisher ROS package to create and update the transform tree. The robot_state_publisher uses individual joint rotations and translations published on a /joint_states topic to construct the transform tree. Since the transforms HCM and HSL are comprised of a rotation and translation six separate joint states – x, y, z, roll, pitch, yaw – need to be published for each degree of freedom. This is seen in the attached full Multisense-SL ROS TF tree with the pre_spinde_cal and post_spindle_cal transform segments.
1.3. ROS Laser Interface
The Multisense SL ROS driver offers three primary mechanisms to process and view laser data: the /laser/scan, /laser/points2, and /laser/calibration/raw_lidar_data topics. In addition to laser data, the driver presents the raw calibration matrices on the /laser/calibration/raw_lidar_cal topic.
1.3.1. Topic: /multisense/lidar_scan
The lidar_scan topic is a sensor_msgs/LaserScan message containing the raw laser range and intensity data in polar coordinates along with information used to interpolate the Cartesian position of each range reading. The transformation of the laser data into the left camera frame is managed by the transform tree constructed by the robot_state_publiser. When the laser is spinning the motion between individual range returns is compensated for in ROS internally using SLERP. This interpolation can also be used to account for external motions of the head; assuming the Multisense-SL’s transform tree is a child of the frame in which the motion is occurring.
1.3.2. Topic: /multisense/lidar_points2
The lidar_points2 topic is a sensor_msgs/PointCloud2 message which contains laser data transformed into the left camera frame. Each full laser scan is published as an individual point cloud. When transforming the laser data into Cartesian space both the scan angle and the spindle angle are linearly interpolated. Because this transformation is done with no knowledge of the heads state, it cannot compensate for external movements of the sensor head.
1.3.3. Topic: /laser/calibration/raw_lidar_data & raw_lidar_cal
The /laser/calibration/raw_lidar_data and /laser/calibration/raw_lidar_cal are a custom message types which contain all the information necessary to manually transform the laser data into the left camera optical frame. The /laser/calibration/raw_lidar_data topic contains the raw laser data as well as information about the angle of the spindle frame at the start and end of the laser scan. The /laser/calibration/raw_lidar_cal topic contains the two static calibration transforms HCM and HSL flattened to 16 element arrays in row-major order. Using these two topics the laser data can be manually transformed using a custom interpolation scheme external of the Multisense-SL ROS driver.
1.4. External Transformation Example
The following excerpts of code use ROS’s KDL and Angles packages to transform laser data into the left camera frame. The example consists of two subscribers; one to the /laser/calibration/raw_lidar_data topic and the other to the /laser/calibration/raw_lidar_cal topic. The full example code is attached at the bottom of this post.
1.4.1. /laser/calibration/raw_lidar_cal Subscriber
The above code constructs two KDL::Frame objects, laserToSpindle and motorToCamera, from a single /laser/calibration/raw_lidar_cal message. These Frames correspond to HCM and HSL respectively.
1.4.2. /laser/calibration/raw_lidar_data Subscriber
The above code generates a KDL::Vector pointInCamera which contains the x, y, and z coordinates of a single laser range point transformed into the left camera frame. The code linearly interpolates the laser scan angle as it spins counterclockwise from -135 degrees to 135 degrees. The angle of the spindle, originally published in micro-radians, is also linearly interpolated to compensate for motion due to the rotation of the spindle.